37 research outputs found
Recolección en olivar
España es el primer productor mundial de aceite de oliva. En este artÃculo se describen los equipos para la recogida de la aceituna
Inspección de frutas y hortalizas mediante videocámara, estado actual de la técnica (II)
En los últimos años hemos asistido a cambios notables en el ámbito de la inspección automatizada de frutas y hortalizas. En este artÃculo repasamos algunos conceptos y avances en relación con la clasificación de productos hortofrutÃcolas mediante videocámara. Hace una década la detección de defectos externos no estaba conseguida, mientras que sà lo estaba la clasificación por tamaño y color. Actualmente podemos decir que la clasificación en base a defectos externos funciona bien: los equipos comerciales son capaces de detectar dichos defectos, separando los frutos de la máxima calidad comercial de aquellos de calidad inferior. El problema tradicional de la confusión del cáliz o el pedúnculo del fruto con un defecto se puede considerar superado. Sin embargo, la mayorÃa de los equipos actualmente instalados en las centrales hortofrutÃcolas no son capaces de discernir el tipo de defecto. Conseguir esto serÃa interesante, ya que permitirÃa conocer qué defectos son los más frecuentes, y se podrÃa actuar de cara a la campaña siguiente en relación con el manejo del cultivo o del producto en postcosecha. Recientemente se han desarrollado sistemas de clasificación mediante videocámara capaces de discernir el tipo de defecto y de identificar podredumbre
Medición en campo de la potencia máxima entregada por paneles fotovoltaicos bajo condiciones estándar de medida
El uso de la electricidad en el medio rural necesita de fuentes de energÃa autónomas. Una de las opciones que sigue ganando fuerza debido a la bajada de precios es la generación de electricidad mediante paneles solares fotovoltaicos. Los paneles fotovoltaicos tienen garantÃas que oscilan entre los 20 y 25 años sobre la potencia máxima entregada. Medir dicha potencia necesita de unas condiciones que habitualmente no se dan y de equipos de medida normalmente muy caros. Este trabajo presenta un equipo de medida basado en PC para paneles fotovoltaicos. Asimismo discute sobre la metodologÃa a utilizar en campo para obtener de la forma más precisa posible, medidas de la potencia entregada por un panel fotovoltaico en condiciones estándar de medida. Se considera de gran interés disponer de un mecanismo con la suficiente precisión para determinar si la bajada de potencia de un módulo está dentro de las condiciones de garantÃa
Success possibilities of grid parity in particular cases in the new spanish regulatory framework
During the last 10 years the Spanish photovoltaic market has experienced one of the most important
increases worldwide. The continuous raise on the price of the electricity in Spain, as in other European countries,
USA and Japan, as well as the decrease of the cost of solar photovoltaic systems along this decade is opening a new
way to reach grid parity point in some particular scenarios. A new Spanish legislation is being performed toward selfconsumption, and it is in this new context where the grid parity in a wide sense could be achieved.
This work will study different cases in Spain, in order to determine whether grid parity would be possible along 2012.
Keywords: grid parity, self-consumption, photovoltaic, net-meterin
Economic feasibility analysis of choices for not connected clients: photovoltaic off-grid systems, compared to grid based system
Off-grid photovoltaic systems are less constrained by national regulations than their grid-connected counterparts. Off-grid systems do not depend on feed-in tariff and the analysis of their cost-efficiency is more stable along time. This work calculates the economic parameters for two different technologies of photovoltaic systems and compares the levelized cost of electricity (LCOE), with the price of the electricity, including the cost for the connection of the system related to the distance to the grid. The results show that the sustained decline in photovoltaic module¿s price contributes to subsequent decline in LCOE, whereas the increase in the price of grid electricity and materials related to the connection makes off-grid systems more cost-effective for remote areas. Finally, to determine if the photovoltaic system could be an economic alternative for investments in remote regions, a comparison between the cost of grid extension and the LCOE of a high capacity photovoltaic system was undertaken
Analysis of air mass dependence of three photovoltaic arrays
The solar spectrum, which is also could be described by air mass factor, has a significant relationship with the performance of photovoltaic modules. The air mass dependence has been investigated by a theoretical method as well as an actual case of three different photovoltaic arrays: polycrystalline silicon, amorphous silicon and cadmium telluride, at the EUIT AgrÃcola-UPM (Madrid, Spain, 40.4426oN, 3.7295oW). The calculating results show that: AM dependence of poly-Si array is positive because an elevating AM-value indicates a red shift and poly-Si module is more red sensitive; On the contrary, as a-Si module and CdTe module are more blue sensitive, their AM dependences are negative. Furthermore, the outdoor AM dependences of three arrays are corresponding to the calculating results although the thermal annealing effect could be superimposed on spectral effect in the case of a-Si. Keywords: PV system, spectral response, polycrystalline silicon, a-Si, CdT
Student Reciprocal Peer Teaching as a Method for Active Learning: An Experience in an Electrotechnical Laboratory
Active learning is one of the most efficient
mechanisms for learning, according to the psychology of
learning. When students act as teachers for other students,
the communication is more fluent and knowledge is
transferred easier than in a traditional classroom. This
teaching method is referred to in the literature as reciprocal peer teaching. In this study, the method is applied to laboratory sessions of a higher education institution course, and the students who act as teachers are referred to as ‘‘laboratory monitors.’’ A particular way to select the monitors and its impact in the final marks is proposed. A total of 181 students participated in the experiment, experiences with laboratory monitors are discussed, and methods for motivating and training laboratory monitors and regular students are proposed. The types of laboratory sessions that can be led by classmates are discussed. This work is related to the changes in teaching methods in the Spanish higher education system, prompted by the Bologna Process for the construction of the European Higher Education Are
TecnologÃa de Visión Artificial 3D
La visión artificial es una herramienta potente para la inspección externa de productos alimentarios. Actualmente es rara la industria alimentaria que no emplea tecnologÃa para el control de calidad de la producción. La mayorÃa de los sistemas de visión instalados actualmente son 2D, es decir, analizan imágenes planas tomadas "a vista de pájaro": estas imágenes permiten evaluar las caracterÃsticas de tamaño, forma y color de los productos. Pero cada vez hay más aplicaciones en las que además de las caracterÃsticas anteriores conviene disponer de un modelo 3D del objeto inspeccionado, lo cual se consigue con equipos de visión artificial 3D
Rehabilitación de un taller de prácticas para la adaptación a las nuevas titulaciones según el proceso de Bolonia en la EUIT AgrÃcola (UPM).
El proceso de Bolonia supone una gran oportunidad para aplicar en el aula nuevas metodologÃas de aprendizaje activo. Sin embargo, estas técnicas necesitan la adaptación de las instalaciones de los distintos centros ya que la mayorÃa de las aulas, laboratorios y talleres tienen una distribución correcta para el desarrollo de clases magistrales, dificultando la realización de distintas técnicas grupales. Las nuevas titulaciones, orientadas a una mayor cooperación y adquisición de competencias transversales asociadas al trabajo grupal requieren, por tanto, la adaptación de estas instalaciones para la consecución de los objetivos de las asignaturas incluidas en los nuevos planes de estudio. En la Escuela Universitaria de IngenierÃa Técnica AgrÃcola han finalizado las obras del taller de prácticas del departamento de IngenierÃa Rural, donde se pretende mejorar la calidad docente orientando la docencia hacia las nuevas metodologÃas de enseñanza que vendrán determinadas con la implantación de las nuevas titulaciones adaptadas al EEES
Water harvesting for young trees using Peltier modules powered by photovoltaic solar energy
Young trees transplanted from nursery into open field require a minimum amount of soil moisture to successfully root in their new location, especially in dry-climate areas. One possibility is to obtain the required water from air moisture. This can be achieved by reducing the temperature of a surface below the air dew point temperature, inducing water vapor condensation on the surface. The temperature of a surface can be reduced by applying the thermoelectric effect, with Peltier modules powered by electricity. Here, we present a system that generates electricity with a solar photovoltaic module, stores it in a battery, and finally, uses the electricity at the moment in which air humidity and temperature are optimal to maximize water condensation while minimizing energy consumption. Also, a method to reduce the evaporation of the condensed water is proposed. The objective of the system is to sustain young plants in drier periods, rather than exclusively irrigating young plants to boost their growth